GeorgiaFence Rules

Fulton County

Fence Rules in Hapeville, Georgia

Last verified: August 31, 2026

This page is maintained manually and may not reflect very recent ordinance changes. Always confirm current rules with your local permitting office.

For information only. Fence rules change frequently and this site may not reflect every requirement that applies to your property (HOA covenants, easements, variances, recent amendments). Always verify with your local permitting office before building. Full disclaimer

At a glance

In Hapeville, fence height limits are: Most homes: 4 ft max in any front yard. That covers R-SF, R-1 through R-5 and R-0; R-AD zoned lots: no fence in the front yard, under Sec. 93-5-7; side and rear yards, 6 ft max; 8 ft max in R-SF, R-1 through R-5 and R-0 where the side or back line abuts an I-1, I-2, C-1, C-2 or C-T district.

Not required for a typical residential fence, but the code attaches conditions elsewhere; Special flood hazard area: a fence needs a city permit before work starts, under Ch. 51; C-1, C-2, I-1 and I-2: a fence over 4 ft needs a landscaped strip at least 3 ft wide between the fence and the street right-of-way, approved before a building permit is issued.

On corner lots in Hapeville: Nothing over 4 ft tall within 20 ft of where two street rights-of-way meet, or where a railroad or a private driveway meets a street. Fences, walls, signs and plantings all count, under Sec. 93-2-7; No chain link along a property line that abuts a neighbor's front property line, or along the street frontage.

Pool fences in Hapeville: The city adopts Georgia's state pool standard by reference rather than setting its own height; Under that standard: a barrier at least 4 ft tall, openings no larger than 4 in, and horizontal rails at least 45 in apart or placed on the pool side.

Fence setbacks in Hapeville: Fences and freestanding walls (retaining walls excepted) may not sit in any public right-of-way; No numeric setback from an interior property line.

Prohibited fence materials in Hapeville: Barbed wire, concertina wire, razor wire and electrified fencing, in every district; Chain link: allowed only in a rear yard on an interior lot not next to a public right-of-way, so it is banned in front and side yards; Only material made for fences: no tin or plastic roofing, doors or car parts.

Fence Regulations

Hapeville

Permit Requirements
Not required for a typical residential fence, but the code attaches conditions elsewhere. Special flood hazard area: a fence needs a city permit before work starts, under Ch. 51. C-1, C-2, I-1 and I-2: a fence over 4 ft needs a landscaped strip at least 3 ft wide between the fence and the street right-of-way, approved before a building permit is issued. Variance: $350, paid with the notice of appeal, under Sec. 87-3-5. Public Works 404-669-2120. Planning and Zoning 404-669-8269.
Height - Front Yard
Most homes: 4 ft max in any front yard. That covers R-SF, R-1 through R-5 and R-0. R-AD zoned lots: no fence in the front yard, under Sec. 93-5-7.
Height - Side/Rear
6 ft max. 8 ft max in R-SF, R-1 through R-5 and R-0 where the side or back line abuts an I-1, I-2, C-1, C-2 or C-T district.
Height Notes
Heights run by district. Homes in R-SF, R-1 through R-5 and R-0: 4 ft in any front yard, 6 ft in side and back yards, 8 ft on a line abutting an I-1, I-2, C-1, C-2 or C-T district. R-AD: no fence in the front yard, 6 ft in side and back yards, under Sec. 93-5-7. C-R, V and UV: 4 ft front, 6 ft side and back, 8 ft on a line abutting a residential or C-T district. C-1 and C-2: 6 ft in any yard, 8 ft abutting residential or C-T. I-1 and I-2: 8 ft in any yard. The zoning code defines height only for buildings, so it sets no method for measuring a fence. These limits do not apply to retaining walls.
Corner Lots
Nothing over 4 ft tall within 20 ft of where two street rights-of-way meet, or where a railroad or a private driveway meets a street. Fences, walls, signs and plantings all count, under Sec. 93-2-7. No chain link along a property line that abuts a neighbor's front property line, or along the street frontage.
Materials Allowed
Front yards in R-SF, R-1 through R-5 and R-0: ornamental metal, masonry, wood, vinyl, or another ornamental material made for fences. Along public rights-of-way: ornamental metal, ornamental masonry, wood, or another ornamental material made for fences. Chain link: rear yards only, on interior lots not next to a public right-of-way. Neighborhood conservation area: a new street-facing fence must be picket wood, stone, composite material or ornamental metal, which excludes vinyl, under Sec. 81-1-7.
Materials Prohibited
Barbed wire, concertina wire, razor wire and electrified fencing, in every district. Chain link: allowed only in a rear yard on an interior lot not next to a public right-of-way, so it is banned in front and side yards. Only material made for fences: no tin or plastic roofing, doors or car parts. No chain link visible from the street in the neighborhood conservation area, under Sec. 81-1-7.
Historic Districts
No Certificate of Appropriateness process was found in the city code.
Setbacks
Fences and freestanding walls (retaining walls excepted) may not sit in any public right-of-way. No numeric setback from an interior property line.
Design Requirements
Sections of fence more than half solid must have their framing supports facing the inside of your lot. Neighborhood conservation area, generally north of North Central Avenue or west of Virginia Avenue: a new fence next to the street must be picket wood, stone, composite material or ornamental metal, with the finished side facing the street, under Sec. 81-1-7. Fences must be lawfully built, kept in good repair and kept structurally sound.
Gates
Not addressed in the city code.
Floodplain Rules
Special flood hazard area or future-conditions flood hazard area: a city permit is required before work starts. The flood chapter covers any man-made change to the land and sets no exemption for fences, under Sec. 51-3-1. Regulatory floodway: encroachments are prohibited. The only ones the code allows there are bridges, culverts, roadways and utilities, under Sec. 51-4-5.
Notes
Governed by Code Sec. 93-2-5(4), with a citywide materials ban at Sec. 84-5-1. Public Works: 404-669-2120; Planning and Zoning: 404-669-8269

Rules can vary within a jurisdiction. Historic districts and zoning overlays often have stricter requirements. Look up your exact address to confirm which rules apply to your property.

Fence rules change from one city and unincorporated area to the next. Compare Hapeville with nearby jurisdictions:

All Fulton County fence rules →

Ready to build your fence in Hapeville?

FenceWorks of Georgia is Atlanta's premier fence company: residential and commercial installation, repair, and removal. Free quotes, no obligation.

4.9★ on Google · Google Guaranteed · Financing available