GeorgiaFence Rules

Hall County

Fence Rules in Oakwood, Georgia

Last verified: August 31, 2026

This page is maintained manually and may not reflect very recent ordinance changes. Always confirm current rules with your local permitting office.

For information only. Fence rules change frequently and this site may not reflect every requirement that applies to your property (HOA covenants, easements, variances, recent amendments). Always verify with your local permitting office before building. Full disclaimer

At a glance

In Oakwood, fence height limits are: front yards, No maximum in the zoning code, which sets no front yard fence height limit; Downtown overlay district: 4 ft minimum, 8 ft maximum; side and rear yards, No maximum in the zoning code, which sets no side or rear fence height limit; Downtown overlay district: 4 ft minimum, 8 ft maximum.

Required from the zoning administrator for every fence and wall, at any height. There is no exemption threshold; A separate zoning administrator permit is required to site and build a swimming pool; City Hall, 4035 Walnut Circle: 770-534-2365.

On corner lots in Oakwood: On a corner lot: no fence, wall, sign, hedge or planting that blocks sight lines between 2.5 ft and 12 ft above the roadway, within the triangle formed by the street right-of-way lines (or their extensions) and a line joining points 25 ft from the intersection.

Pool fences in Oakwood: 4 ft minimum security fence enclosing the pool, providing security against unauthorized use; The state pool code also applies; A zoning administrator permit is required to site and build the pool.

Fence setbacks in Oakwood: At least 2 ft from a public right-of-way, and never placed so it blocks vision along the right-of-way.

Prohibited fence materials in Oakwood: Barbed wire: allowed only in agricultural, commercial and industrial districts, as top strands six feet above the ground; Downtown overlay district: barbed wire, razor wire, plastic and cloth are prohibited; Chain link in that overlay is allowed only where it is not readily visible from a street, trail or neighbor.

Fence Regulations

Oakwood

Permit Requirements
Required from the zoning administrator for every fence and wall, at any height. There is no exemption threshold. A separate zoning administrator permit is required to site and build a swimming pool. City Hall, 4035 Walnut Circle: 770-534-2365
Height - Front Yard
No maximum in the zoning code, which sets no front yard fence height limit. Downtown overlay district: 4 ft minimum, 8 ft maximum.
Height - Side/Rear
No maximum in the zoning code, which sets no side or rear fence height limit. Downtown overlay district: 4 ft minimum, 8 ft maximum.
Height Notes
The zoning code sets no fence height maximum. Any height limit comes from the overlay district design standards the city council adopts by resolution. Downtown Overlay District: every fence must be at least 4 ft and no more than 8 ft tall, and the District Design Review Committee reviews the fence permit. The road corridor overlay districts adopt portions of those same downtown standards. A fence over 8 ft also needs a building permit, under Sec. 12-48(d). The city publishes an overlay district map with its development regulations.
Corner Lots
On a corner lot: no fence, wall, sign, hedge or planting that blocks sight lines between 2.5 ft and 12 ft above the roadway, within the triangle formed by the street right-of-way lines (or their extensions) and a line joining points 25 ft from the intersection.
Materials Allowed
The zoning code names no approved materials for a fence at a single-family home. Downtown overlay district: a shared fence or wall along a public street frontage, around a business, apartment complex or subdivision, must be natural stone, clay brick, architectural concrete or wood. Faux rock and faux stone or brick panels are not allowed. Townhouse and apartment screening fences must match the development's architecture and be built of weather and rot resistant materials, under Sec. 54-377 and Sec. 54-400.
Materials Prohibited
Barbed wire: allowed only in agricultural, commercial and industrial districts, as top strands six feet above the ground. Downtown overlay district: barbed wire, razor wire, plastic and cloth are prohibited. Chain link in that overlay is allowed only where it is not readily visible from a street, trail or neighbor. Chain link and vinyl are prohibited on the screening fence required behind townhouses and apartments, under Sec. 54-377 and Sec. 54-400. Plain wood picket fences are allowed in the overlay only in the downtown residential sub-district.
Historic Districts
N/A
Setbacks
At least 2 ft from a public right-of-way, and never placed so it blocks vision along the right-of-way.
Notes
Governed by the city's own code, Sec. 54-80(1), not Hall County rules. Zoning Administrator, City Hall: 770-534-2365

Rules can vary within a jurisdiction. Historic districts and zoning overlays often have stricter requirements. Look up your exact address to confirm which rules apply to your property.

Fence rules change from one city and unincorporated area to the next. Compare Oakwood with nearby jurisdictions:

All Hall County fence rules →

Ready to build your fence in Oakwood?

FenceWorks of Georgia is Atlanta's premier fence company: residential and commercial installation, repair, and removal. Free quotes, no obligation.

4.9★ on Google · Google Guaranteed · Financing available