GeorgiaFence Rules

Walton County

Fence Rules in Monroe, Georgia

Last verified: August 29, 2026

This page is maintained manually and may not reflect very recent ordinance changes. Always confirm current rules with your local permitting office.

For information only. Fence rules change frequently and this site may not reflect every requirement that applies to your property (HOA covenants, easements, variances, recent amendments). Always verify with your local permitting office before building. Full disclaimer

At a glance

In Monroe, fence height limits are: Character districts in the city core: 3.5 to 4 ft along the street; All other lots: the zoning ordinance sets no front yard limit; Character districts in the city core: 6 ft max on the sides and rear; All other lots: the zoning ordinance sets no side or rear limit.

Required. The zoning ordinance makes it unlawful to start work on any structure without a building permit, and it defines a fence as a structure (Sec. 1505.2); The city publishes no fence-specific application, so ask the Code Department which form to file; Code Department, 215 N. Broad Street, 770-207-4674.

On corner lots in Monroe: Nothing may block the view between 2.5 ft and 10 ft above the ground within 20 ft of a street or railroad crossing, except downtown; In the character districts the 3.5 to 4 ft street limit applies to both street sides; A fence may not project over a street or sidewalk so as to block the view or use of others (Sec. 94-4).

Pool fences in Monroe: 4 ft minimum, in place before the pool goes into service; Pools must sit at least 5 ft from any property line and need prior approval from the Walton County Health Department.

Fence setbacks in Monroe: None for fences. The ordinance sets setbacks for accessory buildings, not fences.

Prohibited fence materials in Monroe: Character districts in the city core: vinyl, exposed or painted aggregate concrete, smooth or split-faced block; Chain link is not allowed along the street. Barbed, razor and concertina wire only at the rear; Chain link of any type is banned in a Monroe and Walton Mills Historic Overlay development.

Fence Regulations

Monroe

Permit Requirements
Required. The zoning ordinance makes it unlawful to start work on any structure without a building permit, and it defines a fence as a structure (Sec. 1505.2). The city publishes no fence-specific application, so ask the Code Department which form to file. Code Department, 215 N. Broad Street, 770-207-4674
Height - Front Yard
Character districts in the city core: 3.5 to 4 ft along the street. All other lots: the zoning ordinance sets no front yard limit.
Height - Side/Rear
Character districts in the city core: 6 ft max on the sides and rear. All other lots: the zoning ordinance sets no side or rear limit.
Height Notes
In the character districts, height is measured from the average undisturbed grade of the neighboring property at the property line. A fence built as required screening must be at least 6 ft tall and approved by the Code Enforcement Officer (Sec. 550.2). The 25 ft cap in the ordinance applies to accessory buildings, not fences.
Corner Lots
Nothing may block the view between 2.5 ft and 10 ft above the ground within 20 ft of a street or railroad crossing, except downtown. In the character districts the 3.5 to 4 ft street limit applies to both street sides. A fence may not project over a street or sidewalk so as to block the view or use of others (Sec. 94-4).
Materials Allowed
Character districts in the city core: natural wood, brick, natural stone, stucco over masonry, wrought iron and aluminum. Wood along the street must be picket style. Other wood types are allowed on the sides and rear. Chain link is allowed at the sides and rear only. Barbed, razor and concertina wire are allowed at the rear only, and must be screened from roads and neighboring property. All other lots: the zoning ordinance names no approved fence materials.
Materials Prohibited
Character districts in the city core: vinyl, exposed or painted aggregate concrete, smooth or split-faced block. Chain link is not allowed along the street. Barbed, razor and concertina wire only at the rear. Chain link of any type is banned in a Monroe and Walton Mills Historic Overlay development.
Historic Districts
In the Historic Preservation (HPO) and Corridor Design (CDO) overlay districts, fences need design review board approval.
Setbacks
None for fences. The ordinance sets setbacks for accessory buildings, not fences.
Design Requirements
Fences and walls must be kept structurally sound and in good repair: no loose or rotting material, braces and supports properly fastened.
Notes
Governed by the City of Monroe Zoning Ordinance adopted December 10, 2024 and amended January 13, 2026. Fence rules turn on whether your lot is in a character district or is regular zoned, and the Code Department can tell you which. Code Department, 215 N. Broad Street: 770-207-4674

Rules can vary within a jurisdiction. Historic districts and zoning overlays often have stricter requirements. Look up your exact address to confirm which rules apply to your property.

Fence rules change from one city and unincorporated area to the next. Compare Monroe with nearby jurisdictions:

All Walton County fence rules →

Ready to build your fence in Monroe?

FenceWorks of Georgia is Atlanta's premier fence company: residential and commercial installation, repair, and removal. Free quotes, no obligation.

4.9★ on Google · Google Guaranteed · Financing available