GeorgiaFence Rules

Tattnall County

Fence Rules in Glennville, Georgia

Last verified: May 26, 2026

This page is maintained manually and may not reflect very recent ordinance changes — always confirm current rules with your local permitting office.

For information only. Fence rules change frequently and this site may not reflect every requirement that applies to your property (HOA covenants, easements, variances, recent amendments). Always verify with your local permitting office before building. Full disclaimer

At a glance

In Glennville, fence height limits are: front yards — Per City of Glennville Zoning Ordinance, Ch 62; side and rear yards — Per City of Glennville Zoning Ordinance, Ch 62.

Yes — a fence permit is required in Glennville. Fence permit required. Glennville has a specific Fence Permit (separate from building permit).

On corner lots in Glennville: No fence or structure shall obstruct vision clearance at corners, curb cuts, or railroad crossings in any zone.

Pool fences in Glennville: Georgia state minimum: 48-inch barrier, self-closing/self-latching gate.

Fence setbacks in Glennville: Per city zoning ordinance. Cannot be in public right-of-way.

Prohibited fence materials in Glennville: Per city zoning ordinance (Ch 62).

Fence Regulations

Glennville

Permit Requirements
Fence permit required. Glennville has a specific Fence Permit (separate from building permit).
Height - Front Yard
Per City of Glennville Zoning Ordinance, Ch 62.
Height - Side/Rear
Per City of Glennville Zoning Ordinance, Ch 62.
Height Notes
Fences must not obstruct vision clearance at corners, curb cuts, or railroad crossings.
Corner Lots
No fence or structure shall obstruct vision clearance at corners, curb cuts, or railroad crossings in any zone.
Materials Allowed
Per city zoning ordinance (Ch 62).
Materials Prohibited
Per city zoning ordinance (Ch 62).
Setbacks
Per city zoning ordinance. Cannot be in public right-of-way.
Design Requirements
No fence shall create a traffic hazard or obstruct vision clearance.
Notes
Explicit fence permit required. Ch 62 Zoning PDF on city website. City Hall: 134 S Veterans Blvd, Glennville GA 30427, 912-654-2461.

Rules can vary within a jurisdiction — historic districts and zoning overlays often have stricter requirements. Look up your exact address to confirm which rules apply to your property.

Fence rules change from one city and unincorporated area to the next. Compare Glennville with nearby jurisdictions:

All Tattnall County fence rules →

Ready to build your fence in Glennville?

FenceWorks of Georgia is Atlanta's premier fence company — residential and commercial installation, repair, and removal. Free quotes, no obligation.

4.9★ on Google · Google Guaranteed · Financing available